Clutches and Brakes

EP-250

Butt shaft clutch/brake unit

This is a through shaft type/ input output included unit which warner clutch/ brake installed.
By just coupling both side shaft to driving side and loading side, you can start to use immediately.

Model EP-250
Clutch Brake
Built-in clutch/brake 7 7
Static friction torque Nm 24
Rated voltage DC-V 7 9.7
Weight kg 3.0

1. This figure is EP-400. Details are with some variation depending on the model.
2. The installed clutch and brake are customized for EP series

Unit: mm

Diameter direction
A 116
B 44
C 58
E 29
G 9
H 117
Shaft direction
L 225
M 155
N 67.5
O 57
P1 112.5
P2 112.5
R 80
Z 7
Shaft edge
Q 31
QK 25
d 13
b 4
h 4
t 2.5

CAD

Information obtained from CAD data should be treated as reference only, except for the dimensions shown.
Please note that bolt and tap positions may change.

All information is subject to change without notice due to quality improvement or modification.

EP-250
DXF156 KB

Power box

High frequency controller

Information

機種検索